CFES-2 Easy Clean Coating

All Products

产品介绍

CFES-2 Super-proof Nano New Material Easy-clean Electronic Coating

CFES-2 Super-proof Easy-clean Electronic Coating Product Introduction

CFES-2 is a two-component solvent-based easy-to-clean electronic coating, with strong easy-to-clean performance, strong adhesion, and can be self

It can be dried and heated to promote curing, and can be used in scenes where heating is not suitable.

Characteristics of CFES-2 super-proof and easy-cleaning electronic coating

1、This product is a two-component self-drying moisture curing coating, environmentally friendly and easy to construct;

2、Easy to clean effect is good, realize zero water cleaning;

3、Can be used outdoors;

4, can be self-drying, can be used in metal, plastic, ceramics and other substrates.

CFES-2 super anti-easy to clean electronic coating method - spraying

1、Substrate surface degreasing and descaling (can be sandblasted or cleaned with detergent, according to the site conditions);

2、Mix the AB components in accordance with the prescribed ratio and shake well;

3、Spray or dip coating method will be coated on the surface of the workpiece, the ideal dry film thickness of 15-20 microns.

The ideal dry film thickness is 15-20 microns;

4、Self-drying at room temperature, surface drying 1h, solid drying 7 days or moisture curing 90℃ 1h;

Technical parameters of CFES-2 super-proof and easy-to-clean electronic coatings

Shelf Life of CFES-2 Super Anti-Clean Electronic Coating

Shelf life of 6 months in a cool dry place (25℃)

Eight advantages of the superhydrophobic coating of the new superprotective material: excellent water resistance, excellent short-circuit resistance, excellent corrosion resistance, natural self-cleaning, good heat dissipation, excellent anti-bacterial properties, excellent anti-condensation properties, and excellent anti-frosting/freezing properties.

CFES-2 Easy Clean Coating