CF-32 anticorrosive water-based self-drying electronic coating

All Products

产品介绍

CF-32 super anti-nano new material water-based self-drying anti-corrosion electronic coating

CF-32 anti-corrosion coating product features

Waterborne one-component cationic epoxy resin coating with strong corrosion resistance, strong adhesion, suitable for transition layer, self-drying, can be heated to promote curing.

CF-32 anticorrosion coating basic parameters:

Appearance: milky white

Ratio: single component

Viscosity: 25±3s

Solid content: 48±2% or so

Specific gravity: 1.01±0.05g/mL

Coating color: colorless

Applicable technology: dip coating, spraying

Curing condition: Room temperature self-drying 24h or 100℃ for 60 minutes.

Suggested film thickness: 15-20um

CF-32 anticorrosion coating construction method (see TDS)

1、Clean the surface of substrate to remove oil and dirt;

2、Use spraying or dip coating method to apply the coating on the surface of the substrate, the ideal dry film thickness of 15-20 microns;

3, Curing: room temperature self-drying 24h or 100 ℃ for 60 minutes.

CF-32 coating acid and alkali corrosion resistance test method and results

Water-based epoxy coatings were coated on aluminum, copper and stainless steel, 24h room temperature self-drying, coating thickness of 10 microns, and then immersed in 5% hydrochloric acid (50 ℃), 5% sodium hydroxide (50 ℃), as well as salt spray box for the test

CF-32 5% hydrochloric acid (50℃) test results

CF-32 5% Sodium Hydroxide (50°C) Test Results

CF-32 Neutral Salt Spray Test Results

Eight advantages of the superhydrophobic coating of the new superprotective material: excellent water resistance, excellent short-circuit resistance, excellent corrosion resistance, natural self-cleaning, good heat dissipation, excellent anti-bacterial properties, excellent anti-condensation properties, and excellent anti-frosting/freezing properties.

CF-32 anticorrosive water-based self-drying electronic coating